Hamza Arif

▪ Safely lifted and positioned an 89.9-ton Reactor Pressure Vessel (RPV) head onto a storage stand.
▪ Successfully coordinated the placement of a 56.3-ton Missile Shields on RPV Head using a polar
crane, ensuring precise alignment and safety during the operation.
▪ Skilled in operating polar cranes for the safe lifting and placement of 37-ton reactor pressure vessel
(RPV) upper internals onto storage stands and back to the RPV.
▪ Executed the safe lifting and placement of lower internals/core barrel ( 48-tons) on Reactor Pressure
Vessel (RPV) to and from the storage stand using a polar crane. Remove and placed of concrete
blocks & store at 0m below the gantry crane.
▪ Opening and closing of Equipment hatch for shifting refuelling tools and equipment into RX.
▪ Inspection and preventive maintenance of trolley.
▪ Install trolley on outside rail track at +15m level.
▪ Perform inspection and preventive maintenance of polar crane.
▪ Perform inspection and preventive maintenance of Tools and upending device in RX.
▪ Perform function test of conveyor car by using Dummy fuel assembly.
▪ Perform inspection and preventive maintenance of Fuel manipulator crane, control rods, drive shafts
latched and unlatched tool, reactor internal lifting rig, electrical hoists of RPV head lifting rig.
▪ Assembling of RPV Internal lifting rig. Removal and opening of blind flange.
▪ Remove old and install new cavity sealing ring. Dismantling and installed of thermocouple seals and
reactor vessel head.
▪ De tensioning and tensioning of RPV Studs. Install and removal of stud hole plug.
▪ Install threaded sleeves into guide columns installation holes and install guide columns.
▪ Disconnect anti seismic supports from the RPV Head lifting rig.
▪ unlatching and latching all control rod drive shafts.
▪ shifted new fuel assemblies from new fuel storage racks to spent fuel pool where core is to be
arranged.
▪ Install underwater camera on FMC Crane and perform VT of Core top before fuel unloading.
▪ Remove and place FME Cover on RPV if required. Performed insert exchange of RCCA and TPA
assemblies.
▪ Lubricated main studs and nuts with N5000.
▪ verify core loading by using underwater camera and sign witness sheet.

To receive the Job / Work assignment from Senior Mechanical Technician and Foreman.
▪ Organize and plan the daily maintenance and shutdown activities.
▪ Print the Work Permit as per the assigned job and arrange the required tools and equipment.
▪ Responsible as Permit Receiver/Applicant and Worksite supervisor for all plant maintenance
activities.
▪ Operated production and process equipment in LNG and condensate refining units.
▪ Monitored plant parameters such as pressure, temperature and flow rates from control system.
▪ Perform routine equipment checks and reported abnormalities to team.
▪ Followed SOPs, PTW systems and normal operations during operations.
▪ Maintained operational logs and shifts reports accurately.
▪ Coordinated with field operators and control room for smooth production flow.
▪ Inspection and replacement of all type of spare parts for Rotating & Static equipment.
▪ Daily maintenance of Static and Rotary equipment such as Centrifugal, Rotary and Reciprocating
Pumps, Compressors, ID/FD Fans, Blowers, Gear boxes, Fin Fan PM activities, Tubes Plugging,
Exchangers, etc.
▪ Alignment of Pumps with Laser Alignment kit and Dial Method.
▪ Repair and overhauling of Mechanical Seals, Valves, connecting auxiliary equipment, piping / tubing
connections, steam traps, strainers.
▪ Maintenance (PM & CM) and Repair of the Static equipment such as Heat Exchangers and
Columns.
▪ Repair and maintenance of Refinery product and Utility Piping and Pipe Fittings viz. Valves, Steam
Traps, Nitrogen fittings and Hose connection.
▪ Dismantling and assembling of equipment such as Centrifugal and Positive Displacement Pumps,
Mechanical seal replacement, Pump overhauling and repairing activities.
▪ Perform & witness the System final box up, Mechanical equipment Test Run, Lube Oil flushing,
System leak test and inert gas purging.
▪ To perform maintenance works on high pressure equipment and hydraulic tensioning and tightening
of high-pressure joints.
▪ Carry out the Hydro Test preparation and perform Hydro Test on equipment as per the operations
requirement. Carry out blinding and de-blinding of connecting pipelines to equipment.
▪ Knowledge and Capable of reading and observing the P&ID and Isometrics and Cross Section
Drawings of the Equipment.
▪ Performed as PTW Holder, Gas Watch, Hole Watch & Fire Watch as an additional responsibility.
▪ Responsible to carry out the technical services in a safe manner, avoiding risk or danger for
company personnel’s and maintaining company’s assets.
▪ Conducting daily Toolbox talk (TBT) to identify hazard and risk assessment to make everyone aware
about the JSA, Safe Work Procedure & Practices for all routine and non-routine activities and
performing all the tasks with safety precautions and QELNG Life Saving Rules.
▪ Responsibility to manage weekly materials in Store regarding storage and distribution.